Steinberg CMC Series - Page 22

CMC-PD Editor
CMC Series Operation Manual 22
If you execute [Open] after changing the settings, a
dialog appears to confirm saving of the changes. Click
[Yes] to open the “Save as” window. Click [No] to open a
new file without saving the changes. Click [Cancel] to
cancel opening a file.
The following dialog appears, if the current
settings are saved to an existing file.
Click [Yes] to overwrite the current settings onto the
existing file.
Click [No] to cancel this operation.
5 [Edit] (Edit menu)
Clicking this calls up the following menus.
Items and data which can be copied
*1 Copying and pasting of data can be done between the
two items marked by *1.
*2 All data can be copied between banks.
The following dialog appears as soon as [Revert
To Initial State] is executed.
Click [Yes] to restore the current settings to the
state that existed when the editor was started. Click
[No] to cancel this operation.
The following dialog appears as soon as [Load
Factory Preset] is executed.
Click [Yes] to restore the current settings to the
factory settings.
Click [No] to cancel this operation.
6 [Help] (Help menu)
Clicking this calls up the following menus.
7 Online icon
Displays the connection status between the editor and
the device. This lights as soon as communication with
the device is enabled.
Save as Saves the current changes as a new file.
Menu Function
Copy Copies the currently selected item’s
parameter value to the clipboard. The
item and data which can be copied
are shown in the following table.
Paste Pastes the parameter value copied in
the selected item. You can paste data
only to the same type.
Revert To Initial
State
Restores the current settings to the
state that existed when the editor was
started.
Load Factory
Preset
Restores the current settings to the
factory settings.
Menu Function
Item Data
Pad for normal mode
*1
MIDI note number
[NOTE] for 4Velocity mode
*1
MIDI note number
Pad for 4Velocity mode Velocity
[BANK] for normal mode
*2
Bank for normal
mode
[BANK] for 4Velocity mode
*2
Bank for 4Velocity
mode
Menu Function
Manual Displays the operation manual of the CMC-
PD Editor.
About Displays information about the CMC-PD
Editor.