Stellar® Heavy-Duty Crane Owner’s Manual
WARNING
MOVEMENT HAZARD
Failure to return the valve
bank manual overrides to
the neutral position can
result in unexpected
crane movement.
25159
WARNING
OVERLOAD HAZARD
Tampering with overload
device voids warranty.
Overloaded crane may let the
load down to the ground.
Winch up, boom down, and
extend out will be
inoperative when thecrane
is in overload condition.
28256
Overload Hazard Decal
Location: At Overload Switch
Function: To inform the operator that
tampering with the overload device may
cause a unit failure.
PN: 28256
DANGER
FREE FALLING
MANUAL BOOM EXTENSION(S)
WILL CAUSE
DEATH OR SERIOUS INJURY
• Do not stand in front of extension(s) when removing retention pin(s)
• Do not let extension(s) free fall.
• Properly install retention pin(s) prior to operation.
12452
Free Falling Manual Boom Decal
Location: Inside Crane Compartment, on
Compartment Door
Function: To inform the operator of the hazard
associated with free falling manual boom
extensions, the possible consequences should
the hazard occur, and how to avoid the
hazard.
PN: 12452
-NOTICE-
Do not use the stow hook
for any lifting applications.
For hook stowage only.
24712
Instructional Decal
Location: At Stow Hook area
Function: To caution the operator not to use the
stow hook for any lifting applications.
PN: 24712
Movement Hazard Decal
Location: Below Override Controls
Function: To inform the operator that failure
to return the manual overrides to the neutral
position may result in unexpected crane
movement.
PN: 25159
To Next Page
Loading...
