EasyManua.ls Logo

stellar labs CDT 5521 - Chapter 2 - Operation; Job-Site Setup; Pre-Operation Inspection

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
Safety Decals of Note
DANGER
HOISTING PERSONNEL ON
BOOM, HOOK, LOAD OR LOADLINE
WILL RESULT IN
DEATH OR SERIOUS INJURY
Never hoist personnel on boom, hook, load
or any device attached to crane boom
or load line
12451
DANGER
ELECTROCUTION HAZARD
THIS CRANE IS NOT INSULATED
WILL RESULT FROM CONTACT
OR INADEQUATE CLEARANCE
• Maintain safe clearances from electrical lines. Allow for
boom, electrical line, and load line swaying.
• This crane does not provide protection from contact with
or proximity to an electrically charged conductor.
• Maintain a clearance of at least 10 feet between any part
of the crane, loadline or load and any electrical line
carrying up to 50,000 volts.
• One foot additional clearance is required for every
additional 30,000 volts or less.
C1179
DEATH OR SERIOUS INJURY
DANGER
This remote control box does
not provide you and others with
protection against
will result if the boom, load or
loadline should become
electrically charged.
MAINTAIN SAFE CLEARANCES
FROM POWER LINES
ELECTROCUTION
HAZARD
DEATH OR SERIOUS INJURY
4186
DANGER
ELECTROCUTION HAZARD
KEEP CLEAR OF TRUCK AND LOAD
C4545
DEATH OR SERIOUS INJURY will result
from contact with the load, the crane or the vehicle
if the boom or loadline should become electrically
charged.
Electrocution Hazard Decal
Location: Inside Crane Compartment, on
Compartment Door
Function: To inform the operator that the crane
is not insulated and the possible consequences
if the crane would come into contact with
power lines or electrically charged
conductors., and how to avoid the hazard.
PN: C1179
Hoisting Decal:
Location: Inside Crane Compartment, on
Compartment Door
Function: To inform the operator of the hazard
associated with lifting personnel with the boom,
boom hook, the load or winch loadline, the
possible consequences of lifting personnel, and
how to avoid the hazard.
PN: 12451
Electrocution Hazard Decal
Location: Each side of truck body, Front & Rear
Bumper
Function: To inform the operator and other
personnel in the work area of the hazard
associated with contact or proximity to electrical
lines, the possible consequences should the hazard
occur and how to avoid the hazard.
PN: C4545
Electrocution Hazard Decal
Location: Inside Crane Compartment, on
Compartment Door
Function: To inform the operator of the hazard
associated with contact or proximity to
electrical lines, the possible consequences
should the hazard occur and how to avoid the
hazard.
PN: 4186

Related product manuals