Stellar® Heavy-Duty Crane Owner’s Manual
Operation Hazard Decal
Location:Inside Crane Compartment, on
Compartment Door
Function: To inform the operator of the need
for proper training, familiarity with safe
operating procedures and, the possible
consequences without training.
PN: C4540
DANGER
FAILURE TO OBEY THE FOLLOWING
WILL RESULT IN
• Follow all recommended inspections and
maintenance practices listed in the equipment
manufacturer’s manuals. If manuals are
missing from this equipment, contact
manufacturer for replacement.
• Do not modify or alter this equipment without
written manufacturers approval. Use only
manufacturer approved attachments or parts
on this equiupment.
• Equipment must be mounted on factory
recommended chassis. If re-mounted or
rebuilt, the equipment must be re-certified.
4190
DEATH OR SERIOUS INJURY
DANGER
FAILURE TO OBEY THE FOLLOWING
WILL RESULT IN
INSTABILITY OR
STRUCTURAL DAMAGE
• Read, understand and follow the equipment
load and work area charts.
• Do not exceed winch or equipment ratings.
• Do not exceed jib load ratings at reduced
boom lengths.
• Weights of accessories attached to the
boom or loadline must be deducted from
the load chart ratings or be added to the
load weight.
4189
DEATH OR SERIOUS INJURY
DANGER
FAILURE TO OBEY THE FOLLOWING
WILL RESULT IN
• Inspect equipment and its operation daily.
• For equipment stability, use only on solid,
level surface with outriggers properly
extended.
• Equipment must be level.
• Operate all controls slowly and smoothly.
• Never operate the equipment with
personnel under boom or load.
• Keep load under boom tip. Do not side
load boom or drag loads. Avoid free
swinging loads.
• Keep at least 3 wraps of loadline on
winch drum.
• For travel, boom and outriggers must be
in stowed position.
C4544
DEATH OR SERIOUS INJURY
DANGER
AN UNTRAINED OPERATOR
SUBJECTS HIMSELF AND
OTHERS TO
YOU MUST NOT OPERATE
THIS EQUIPMENT UNLESS
• You have been trained in the safe
operation of this equipment.
• You read, understand and follow the
safety and operating recommendations
contained in the equipment manufacturer’s
manuals, your employer’s work rules and
applicable government regulations.
C4540
DEATH OR SERIOUS INJURY
Operation Hazard Decal
Location: Inside Crane Compartment, on
Compartment Door
Function: To inform the operator of the
hazard associated with overloading the
crane, the possible consequences should
the hazard occur, and how to avoid the
hazard.
PN: 4189
Operation Hazard Decal
Location: Inside Crane Compartment, on
Compartment Door
Function: To inform the operator and other
personnel in the work area of the hazard
associated with improper maintenance and
unauthorized modifications, the possible
consequences should the hazard occur, and
how to avoid the hazard.
PN: 4190
Training Decal:
Location:Inside Crane Compartment, on
Compartment Door
Function: To inform the operator of the need for
proper inspection procedures, and the possible
consequences of operation without inspection.
PN: C4544
To Next Page
Loading...