Safety
Two Block Hazard Decal
Location: At Boom Tip
Function: To inform the operator of the hazard
associated with bringing the sheave(s) into
contact with the hook, snatch block or load, the
possible consequences should the hazard occur
and how to avoid the hazard. PN: 12300
Moving Stabilizer Hazard Decal
Location: On each stabilizer
Function: To inform the operator of the hazard
associated with stabilizer operation, the possible
consequences should the hazard occur, and how
to avoid the hazard
. PN: C5918
Foot Crushing Hazard Decal
Location: On each stabilizer leg.
Function: To inform the operator and other
personnel in the work area of the hazard
associated with the operation of the stabilizers, the
possible consequences should the hazard occur,
and how to avoid the hazard. PN: C4795
Moving Boom Hazard Decal
Location:Inside Crane Compartment, on
Compartment Door
Function: To inform the operator and other
personnel in the work area of the hazard
associated with a moving boom, especially
while stowing and unfolding the crane, the
possible consequences should the hazard
occur, and how to avoid the hazard.
PN: C4541
DANGER
STOWING & UNFOLDING BOOM
WILL CAUSE
Stand on the opposite side of the boom
when unfolding or stowing the crane.
C4541
DEATH OR SERIOUS INJURY
DANGER
TWO BLOCKING THE CRANE WILL CAUSE
12300
Do not allow the hook block to contact the
boom tip by hoisting up, extending or
lowering the boom.
DEATH, SERIOUS INJURY
OR PROPERTY DAMAGE
DANGER
OUTRIGGERS WILL CAUSE
C4795
SERIOUS CRUSHING INJURY
STAND CLEAR
DANGER
A MOVING OUTRIGGER
WILL CAUSE
SERIOUS CRUSHING INJURY
Do not operate any outrigger unless you or a signal
person can see that all personnel are clear of the
outrigger and its ground contact point.
C5918
To Next Page
Loading...
