Slider26 Owner’s Manual
Hooklift Controls
1. Be familiar with the sequence and operation of the hooklift controls.
2. Each individual hooklift function should have control function decals. Replace them
immediately if they are missing or illegible.
3. Keep hands, feet and control levers free from mud, grease and oil.
4. Be familiar with the control levers and how they operate before attempting to operate
the hooklift.
5. Be prepared before beginning operation of the hooklift:
• All protective guards must be in place.
• Be aware of the surroundings: low branches, power lines, unstable ground.
• Be sure all safety devices provided are in place and in good operating condition.
• Be prepared for all situations. Keep fire extinguisher and first aid kit near.
• Be sure all regular maintenance has been performed.
• Visually inspect all aspects of the hooklift for physical damage.
• Check for fluid leaks.
DANGER
Stellar
®
Slider Controls
55755
Be familiar with the control functions and
sequence of operation. See owner’s manual
for specific information regarding operation.
LIFT
SLIDE HOOK
HOOK AND BAIL
HEIGHTS MUST MATCH
OR LOAD WILL BE
UNSTABLE AND MAY
FALL CAUSING SERIOUS
INJURY OR DEATH
TO OPERATOR AND/OR
BYSTANDERS.
To Next Page
Loading...