Stentofon Pulse - Add SIP Accounts for Telephone Gateways

19
Pulse Technical Manual
A100K11311
3.7.2 Create SIP Station Account
● Under the Server Management tab, select ServerConguration>
Directory Settings
● Under Third Party SIP Terminals enter the Directory Number, Name,
Prole, and Password for the IP telephone.
● Click Add followed by Save
3.7.3 CongureIPTelephone
You now have to log into the 3rd-party IP telephone to congure the
SIP account to register it with the Pulse Server station. The Directory
Number and Password (SIP Account) created in section 3.7.2 is used to
register the 3rd-party station with the Pulse Server.
3.8 Add SIP Accounts for Telephone Gateways
3.8.1 Install License
Before adding SIP accounts to your system, you need to obtain the
Pulse Gateways license key and install it under Station Administration
> Licensing.
3.8.2 Create SIP Gateway Account
● Under the Server Management tab, select ServerConguration>
Directory Settings
When a valid Pulse Gateway license has been installed, the Gateways
parameter will be available.