BGA 868
5.2 Testing with ADG 2 Analyzer
N Test the machine with the STIHL ADG 2 analyzer,
see separate instruction manual and TI bulletins on
STIHL ADG 2.
N Observe the information in the instruction manual.
N Observe safety precautions, see @ 2
N For further information and safety precautions see
instruction manuals of power tool and the ADG 2
analyzer.
5.3 Connecting the STIHL ADG 2 Analyzer
N Insert the analyzer’s plug in a wall outlet.
N Push the battery (1) into the analyzer (2) until you feel
noticeable resistance – then push it as far as stop.
N Insert the adapter (2) in the battery compartment.
5.4 Before servicing
Always remove the battery from the power tool’s battery
compartment before starting the repair work.
The data of the cordless power tool remains stored in the
analyzer for about 30 minutes.