Stihl BGA 86 - Switch, Contact Plate, Electronic Module; Special Servicing Tools, Servicing Aids; Removing the Switch; Installing the Switch

BGA 8618
9.1 Special Servicing Tools, Servicing Aids
– Punch-down tool – 5910 890 4000
– STIHL multipurpose grease – 0781 120 1110
9.2 Removing the Switch
N Preparations, @ 2.4.
N Perform test with ADG 2 Analyzer, @ 5.
N Remove right handle housing, @ 6.2.
N Take the switch (2) with switch housing (1, 3) out of
their seat in the left handle housing.
N Raise the tabs (arrows) on the left switch housing (1)
and remove the right switch housing (3).
N Take the switch (2) out of the switch housing (1).
N Pull connector (8) off the switch (2).
9.3 Installing the Switch
N Place the switch (2) in the left switch housing (1).
N Lubricate socket (arrow) on switch (2) with
multipurpose grease.
9 Switch, Contact Plate, Electronic Module
0000-GXX-8884-A0
1
4
2
3
5
6
7
1
0000-GXX-B644-A0
2
3
8
2
0000-GXX-B645-A0
1