EasyManua.ls Logo

Still ECH 12 - Introduction; Danger to employees

Still ECH 12
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hazard Measure Check note
√ Complete
- Not applicable
Notes
(BetrSichV), employ-
ers' liability insurance
association regulation
104 and the operating
instructions
employers' liability in-
surance association
regulation 104
When parking LPG
trucks
Note the German Ordi-
nance on Industrial
Safety and Health
(BetrSichV), employ-
ers' liability insurance
association regulation
104 and the operating
instructions
O German Ordinance on
Industrial Safety and
Health (BetrSichV) and
employers' liability in-
surance association
regulation 104
With driverless transport systems
Roadway quality inad-
equate
Clean/clear driveways O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Load carrier incorrect/
slipped
Reattach load to pallet O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Drive behaviour unpre-
dictable
Employee training O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Driveways blocked Mark driveways
Keep driveways clear
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Driveways intersect Announce right-of-way
rule
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
No person detection
during depositing and
retrieval
Employee training O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Danger to employees
The operating company must identify and
evaluate the dangers involved in using the
truck. It must also establish which occupation-
al health and safety measures are required to
protect employees. Appropriate operating in-
structions must be drafted and provided for
the driver accordingly. A person responsible
for health and safety must be appointed.
Construction and equipment of the truck corre-
spond to the Machinery Directive 2006/42/EC
and they are therefore identified with the CE
symbol. As a result, these factors are not in-
cluded in the hazard assessment; nor are the
attachments, which have their own CE label-
ling. The operating company must, however,
select the type and equipment of the truck so
Introduction
1
Residual risks
16 5001 801 1505 EN - 12/2019

Table of Contents

Related product manuals