Emergency stop
– Press the emergency switch (2). All power
will be cut off and the vehicle will stop work-
ing.
CAUTION
When the emergency stop button (2) is pressed, it
will lock in position.Rotate the button clockwise half a
turn to release it.Do not pull hard, as it will reset on
its own.
CAUTION
The condition of the floor surface affects the braking
distance of the truck and should be taken into con-
sidered by the operator.
Using the truck on a slope
NOTE
Incorrect use of the truck on slopes is not rec-
ommended.It places particular stress on the
traction motor, brakes and battery.
Be particularly careful near slopes:
●
Never attempt a slope with a gradient great-
er than that specified in the truck's data-
sheet.
●
Make sure that the ground is dry with a non-
slip surface and that the route is clear.
Operation
4
Drive system
635001 801 1505 EN - 12/2019
To Next Page
Loading...
