Still ECH 12 - Safety reverse and emergency stop

Horn
– Press the warning horn button (1).
NOTE
The horn must be used at junctions or places
with poor visibility.
Safety reverse and emergency stop
Safety reverse
– Press the safety reverse button (1). The ve-
hicle will begin to travel in the opposite di-
rection.
CAUTION
If the safety reverse switch resets slowly, this indi-
cates a fault.The cause of the fault must be identified
and eliminated.The spring can be replaced if neces-
sary.
NOTE
The safety reverse button (1) can be pressed
in various ways, such as against the belly.


Operation
4
Drive system
62 5001 801 1505 EN - 12/2019