Break-in period precautions
During the initial stage of putting the truck into
use, it should be operated with low loads.
Within the first 100 hours in particular, the fol-
lowing requirements should also be met:
– Excessive discharge of a new battery dur-
ing initial use must be prevented.It should
generally be charged promptly when at
20%.
– The specified preventive maintenance must
be done thoroughly.
– Avoid sudden braking, driving quickly or
sharp turns.
– Change oil or lubricant promptly according
to the instructions.
– Limit the load weight to 70-80% of the rated
load.
CAUTION
When the truck is in the running-in stage (approx.
100 hours of operation), the equipment user should
check the fastening of the wheel nuts and bolts and
refasten them if necessary.
Operation
4
Break-in period precautions
575001 801 1505 EN - 12/2019
To Next Page
Loading...
