EasyManua.ls Logo

Still ECH 12 - Checks before use

Still ECH 12
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Risk of serious injury and/or major equipment dam-
age.
Place both hands on the tiller and turn off the power
supply before touching moving parts and any equip-
ment.
WARNING
Risk of serious injury and/or major equipment dam-
age.
To prevent visibility being affected or completely ob-
structed during operation of the stacker, do not install
or affix anything on the mast protection screen.
DANGER
Fatal crushing hazard!
The fork carriage must be at its lowest position when
carrying out any work on the protection screen
(cleaning, replacement, etc.).
CAUTION
Equipment wear or damage
The driver is not permitted to sit on the dashboard/
battery cover.
WARNING
Risk of serious injury and/or major equipment dam-
age.
Before driving forwards or backwards, carefully
check in the direction of travel to ensure that it is safe
to proceed.
CAUTION
Equipment wear or damage
To ensure the safety of the driver, the pallet truck
must not be used in the vicinity of forklift trucks.
CAUTION
Equipment wear or damage
To prevent feet from being crushed by the load or
forks, keep a safe distance from other people when
lowering the forks.
WARNING
The working area of the industrial truck must be ade-
quately lit.
If it is insufficiently lit, working spotlights must be in-
stalled. To ensure that the driver can see properly.
Checks before use
WARNING
The truck can only be driven by battery power!
After the truck has arrived or been transpor-
ted, you must perform the following checks
before putting it into use:
Check whether the equipment is intact and
in good condition.
Check whether the hydraulic system is in
good condition.
Check the vertical creep of the truck.
Check the smooth movement of the wheels.
Check the function of the emergency brake
by activating the emergency button.
Check, the tiller arm- switch braking func-
tion
Check the lifting and lowering functions by
operating the buttons.
Check if all bolts and nuts are tightened
firmly.
Visual check if there are any broken hoses
or broken electric wires.
If the truck does not yet have a battery in-
stalled, you must install a battery, making
sure not to damage the battery cables.
Recharge the battery.
If the truck is parked for too long, the wheels
may become slightly flattened where they
touch the ground.The flat areas will automati-
cally return to their former condition after the
truck is driven for a short time.
Operation
4
Checks before use
56 5001 801 1505 EN - 12/2019

Table of Contents

Related product manuals