– Raise the load a few centimetres above its
support.
– Back the truck away from the stack or any
neighbouring loads, gently and in a straight
line.
Transporting loads
– Always carry loads in the forward direction
of travel (A) in order to have the best visibili-
ty.
– When carrying a load on a slope, always
ascend or descend with the load uphill.Nev-
er drive sideways across a slope or perform
a U-turn.
– Reverse travel (B) is to be used solely for
unloading.Since visibility is reduced when
travelling in this direction, drive only at very
slow speed.
Unloading
– Carefully drive the truck to the desired loca-
tion.
– Carefully drive the truck to the unloading
area.
– Lower the load until the fork arms are free
from the pallet.
– Back the truck away in a straight line.
– Raise the forks to mid-height.
CAUTION
Take care not to disturb any adjacent loads, or those
which may be to the side or in front of the load being
handled.
Operation
4
Load handling
68 5001 801 1505 EN - 12/2019
To Next Page
Loading...
