Still ECV 10 C - Checking the Working Environment

Carried
out

Check the battery charging connector.
Check that the battery cable connections are tight and grease the battery poles if
necessary.
Check the drive wheels and rollers for wear and damage.
Check the hydraulic functions.
Check brake function of electromagnetic brakes.
Check whether optional functions are operating normally.
Checking the working environment
Remember to check the working environment
carefully before use.
There must not be any trace of leakage of
consumables under the equipment.
The work area must be kept clear.There must
not be any obstacles or people on the driving
route.
The driver must be vigilant about anything that
could hinder safe operation:
●
There must not be any people in the vicinity
of the vehicle
●
There must not be any people under the
forks after they have been lifted
●
The driver must not use a media player or
any other electronic device that may affect
their peripheral awareness
●
There must be no trace of grease on the
floor
The driver must be particularly careful when
transporting goods.The size of the goods may
affect vehicle handling and obstruct visibili-
ty.The driver must slow down when braking or
turning, because the truck may tip over.
The driver must slow down when passing ob-
stacles, to prevent the truck from losing bal-
ance and driver hand-arm vibration.
Operation
4
Checking the working environment
4550028011505 EN - 03/2022 - 06