CAUTION
After long time of use, the drive wheel will wear and
tear to certain level, at this time, adjust the height of
caster(3) through increasing or decreasing the num-
ber of adjustment shims(2) to make the two casters
and drive wheel to be in close contact with the
ground.
CAUTION
Tyre wear can affect the stability of the truck, adjust
the caster with minor wear on a regular basis, or re-
place the caster with heavy wear. Quality of tyres di-
rectly affects the stability and driving performance of
the device. If you need to replace the factory-fitted
tyres, please use original spare parts provided by the
equipment manufacturer to reach the original design
performance of the truck.
Upon maintenance or replacement for parts of
the caster, please refer to Figure
116702_04-006.
Malfunction analysis
Symptoms Possible reason Solution
Unable to drive
The key switch lock is in the
OFF position
Put the key switch in the ON
position
Battery power is too low
Check the battery charge sta-
tus and charge the battery ac-
cording to requirements
Blown fuse Check the fuse device
Equipment is in charge mode Stop charge mode
Maintenance
5
Malfunction analysis
84 50028011505 EN - 03/2022 - 06
To Next Page
Loading...