Mast lifting and lowering
– Press the lift button(2) until the goods reach
the required height, then release the button.
– Press the lower button(18) until the goods
are lowered to the required height, then re-
lease the button.
CAUTION
To avoid shortening the service life of the cylinder,
try to avoid raising the forks to maximum height
when lifting.
Working with loads
– Before picking up a load
Ensure that its weight does not exceed the
equipment's lift capacity.
– Refer to the nominal capacity specified on
the equipment's capacity rating plate.
– Also make sure that the load is stable, well-
balanced and centred between the forks to
avoid dropping any part of the load.
– Check that the width of the load is compati-
ble with the width of the forks.
CAUTION
Safety footwear must be worn.
CAUTION
Transporting people is strictly prohibited.
DANGER
It is essential to slow down when approaching a
corner or on wet floors.
Operation
4
Hydraulic operations
5950028011505 EN - 03/2022 - 06
To Next Page
Loading...