– Put the tiller in the drive position(M) and use
the drive switch to control direction and
speed.
NOTE
●
F is forwards.
●
R is reverse.
●
B is brake.
●
M is drive.
NOTE
When the tiller is in the brake position(M), the
electromagnetic brake is locked and the vehi-
cle cannot be driven.
Forward travel/reverse travel
Forward travel
– Use your thumb to press the drive switch,
gently and gradually increasing the force in
the (F) direction.
The vehicle will accelerate and move forwards
according to the pressure applied to the drive
switch.
Reverse drive
– Use your thumb to press the drive switch,
gently and gradually increasing the force in
the (R) direction.
The vehicle will accelerate and move back-
wards according to the pressure applied to the
drive switch.
Operation
4
Drive operations
52 50028011505 EN - 03/2022 - 06
To Next Page
Loading...