Sting P20 - Transportation to Installation Site

To Next Page

To Previous Page

MORA OVENS | PRODUCT MANUAL | ENG - PIZZA & PASTRY DECK OVENS | VERSION 220901-1548

- 107 -

TRANSPORTATION TO INSTALLATION SITE

3. Place the oven on a 120 x 80 pallet, the back of the oven should be facing down. Now we have a total width

of 82 cm, see picture 2 below.

4. Use the pallet lifter and transport the oven through the door post. Depending on whether the doorway is

small or large, use the instructions below (small door installation (Fig. 2a) / large door installation (Fig. 2b)):