1m
1m
2m
Figure 1
Charging
1. Install the docking station on flat ground and firmly against a vertical
wall.
2. Ensure there are no obstacles or hollow areas 2m away from the docking
station or 1m on the right and left (Refer Fig 1).
3. The vacuum cannot search for the docking station to charge if the infra-red
transmitting signal is covered.
4. Connect the output terminal of the adaptor with the DC socket of the
docking station (Refer Fig 2).
Please place the power cord of the adaptor along the wall, as it may
interfere with the brush or wheels on the vacuum.
Figure 2
14
1800 898 750
service@wkfe.com.hk
Telephone:
Email:
Instructions Cont.
To Next Page
Loading...
