Instructions Cont.
13
1800 898 750
service@wkfe.com.hk
Telephone:
Email:
Docking Station Overview
The Power LED will light up when the docking station is
connected to power.
The indicator will flicker while recharging.
The transmitting signal is the only way to lead the vacuum
to return to the docking station for charging, so the signal
transmitter position should be clear of any obstacles.
The positive & negative electrodes on the docking station
connect to those of the vacuum. Ensure there are no
obstacles to impact charging.
The power DC socket is used to connect the output
terminal DC24V adaptor. The docking station should be
placed against the wall firmly and the adaptor cable
should be placed out of the vacuums cleaning space.
1 Power indicator
2 Charging indicator
3 Signal transmitter
4-5
Charging positive &
negative electrode
6
Charging power DC
socket
No. Function Guide Function Information
1. Power indicator
2. Charging indicator
3. Signal transmitter
4. Charging positive electrode
5. Charging negative electrode
6. Charging power DC socket
To Next Page
Loading...
