Cleaning the Main Brush and Floor Brush
1. Force the locking bar forward and raise the cover with your thumb. Then
raise the rod of the main cleaning brush with your other hand (Refer Fig 1 and
Fig 2).
2. Take out the main brush and floor brush (Refer Fig 3).
3. Remove any dirt build up and insert the main brush and floor brush into the
holes before closing the cover.
4. Clear any hair or dust particles in the brushes regularly to improve cleaning
performance. Rotate the brush carefully while removing any hair or other
twisted objects.
21
1800 898 750
service@wkfe.com.hk
Telephone:
Email:
Other Useful Information Cont.
To Next Page
Loading...
