24
1800 898 750
service@wkfe.com.hk
Telephone:
Email:
Battery Replacement
1. Release the cover with a screwdriver, open and then take out the battery
(Refer Fig 1 and Fig 2).
2. To replace the battery ensure the positive and negative electrodes are aligned
correctly.
• Please don’t forget to take out the battery before discarding the
vacuum.
• Please remember to turn off the switch before taking out the battery
from the vacuum and space isolater.
• Please don’t place the battery in a high-temperature environment
above 45˚C or in water.
• Please don’t exert external force to the battery.
• The battery should be recycled or disposed of safely.
• If the battery leaks, be careful to avoid battery liquid coming into
contact with skin and clothes.
• If the battery is low it will go to the docking station to recharge which
will be finished within 4-5 hours, then the robot will leave from the
docking station to restart working under “full go” mode. The robot
will work for more than 90-150 minutes after recharging. If the robot
over heats please allow to cool for more than 2 hours.
• If you do not use the machine for a long time, please charge it every
three months to avoid the battery life from shortening or damaging.
Other Useful Information Cont.
To Next Page
Loading...
