BlueMod+B20/BT2.1
User Guide
Release r03 www.stollmann.de Page 5 of 38
Out of Range Detach
If enabled this feature detaches an active link if a given RSSI level is exceeded.
This function is described in chapter Out of Range Detach.
OBEX File Transfer
The BlueMod+B20 includes the Object Push Profile (OBEX transfer) in firmware
V3.100 or later. The firmware supports OPP Client functionality, so outgoing calls to
an OBEX server can be made.
Detailed information about the OBEX file transfer and different connection examples
are described in the chapter OBEX File Transfer.
Communication with Apple Devices
The BlueMod+B20 supports connections to Apple devices using the SPP profile.
Detailed information about this feature are described in chapter Communication with
Apple Devices.
Firmware Startup Timing
This chapter describes the startup timing of the Bluemod+B20.
Firmware Upgrade
The firmware of the BlueMod+B20 can be updated via RS232 or SPI interface.
These different upgrade procedures are described in chapter Firmware Upgrade.
To Next Page
Loading...
Need help?
General