General information
V 152 10 11 Rev.: END
1-3
1.4
Instruction and training aids
As the employer/plant operator, you are obliged to inform and instruct the operating
personnel about existing legal provisions and accident prevention regulations as well
as about existing safety equipment on the gantry press. This obligation also extends
to safety equipment which is installed around the gantry press. In doing so, the
various professional qualifications of the employees must be taken into consideration.
The operating personnel must have understood the instruction process and it must be
ensured that such instruction is observed.
Only in this way will your personnel work in a safety-conscious manner. Observance
of the instruction process should be checked regularly.
As the employer/ plant operator, you should therefore be able to acknowledge in
writing that each employee has received instruction.
The following pages contain examples of training topics as well as a master copy
form to acknowledge that employees have received training/instruction.
To Next Page
Loading...
