Strong PRIMA VI - 3.0 CONNECTION; 3.1 Connecting to a Terrestrial Antenna; 3.2 Connecting to TV with HDMI cable; 3.3 Connecting to TV with SCART cable

5
PART 1 • English
English
11. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
12. RECORD Records the TV programme to the connected USB storage device
13. TIMESHIFT Activates the Timeshift function (Off/On)
14. 0~9 Enters a channel number in viewing mode or a value inside the
respective menu
15. EPG Opens the EPG (Electronic Programme Guide) in TV mode
16. RECALL Back to previously watched channel
17. AUDIO Opens the audio language selection
18. TV/RADIO Toggles between TV or RADIO mode
19. FAV Opens the favourite group selection
20. FILE Opens the Media Player list
21. TTX Displays Teletext on the OSD (On Screen Display)
22. SUBTITLE Shows a list of subtitle languages
23. 5 6 Fast rewind/fast forward
24. Coloured buttons For Multimedia and Teletext functions
3.0 CONNECTION
3.1 Connecting to a Terrestrial Antenna
Fig. 4
To receive broadcasted signals, your terrestrial indoor or outdoor antenna must be connected
to the ANT IN connector on the back of the receiver. Use a properly shielded antenna cable and
suitable connectors.
The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set.
Please consider that the looped signal might be too weak if you use an active antenna.
If the signals at your location are too weak to receive proper signals with an indoor antenna, we
recommend using an outdoor antenna which can be pointed towards the transmission tower. Ask
your local dealer for more information.
3.2 Connecting to TV with HDMI cable
Fig. 4
The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This
connection gives the highest possible quality.
3.3 Connecting to TV with SCART cable
Fig. 4
Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
3.4 Connecting to a Digital Audio Amplifier with S / PDIF
Fig. 4
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital