Strong SRT 40FB4003 User Manual

13. MIX Press this button to superimpose the teletext over the TV programme. Press
again to return to normal teletext mode.
14. HOLD Press to hold the teletext page on screen without update and changes. Press
again to release the hold state.
15. (REVEAL) TIP In teletext mode, press to reveal the hidden information.
16. INDEX Press this button to display index page.
17. (SUB.PAGE) SUB.P
Press this button to enter or exit subpage mode (if subpage is available}. Press
the t u buttons to select a subpage.
18. INFO Display information about the current source.
19. FAV Press to view your assigned favourite list or main list channels. Press pq to
cycle through your assigned favourite channels, press OK to confirm. To open
the selected list directly, you can press the LIST button.
20. AUDIO Press to select available audio languages. Selecting audio description, a
narrator will describe what is happening on the screen for blind or visually
impaired viewers. Press again to turn it off (depending on broadcast).
21. TV/R Switch between TV and radio.
22. MENU Open the menu options. Step back in some menu options.
23. INPUT Select the input source mode.
24. pq tu Navigate the menu.
25. OK Confirm the selection.
26. BACK Step back in some menu options
27.  Exit the current menu.
28. SLEEP Select the sleep time, such as 10 min, 20 min etc.
29. VOL +/ Adjust the volume up or down.
30. CH +/ Change programmes up or down. Big steps in Channel list.
31. PROG Press to enter the Programme Edit menu.
32. u2 Start/Pause playback, press again to continue playback.
33. 3 Press to stop playback.
34. DTV Press to go back to Digital TV.
35. HDMI Press several times to select your HDMI input.
36. 7 Press to play the previous file.
37. 8 Press to play the next file.
38. 6 Press to fast forward.
39. 5 Press to fast reverse.
40. COLOUR BUTTONS
Press to execute the prompt function in TV or DTV menu mode.
2.6 Installing the batteries
Fig. 5
Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the
polarity markings inside the compartment.
NOTE: Pictures are only for reference. Actual items may differ.
1. Slide the cover horizontally.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.
7
English

Strong SRT 40FB4003 Specifications

General

Screen shape	Flat
Response time	8.5 ms
Display diagonal	40 \
Display brightness	250 cd/m²
Display technology	LED
Native refresh rate	60 Hz
Contrast ratio (typical)	5000:1
Display diagonal (metric)	101 cm
Screen format adjustments	16:9
Motion interpolation technology	IQR (Image Quality Ratio) 100 Hz
3D	No
Battery type	AAA
Stand weight	100 g
Tuner type	Digital
Analog signal format system	Not supported
Digital signal format system	DVB-C, DVB-CI+, DVB-S2, DVB-T2
Operating system installed	-
RMS rated power	- W
Product color	Black
Panel mounting interface	200 x 200 mm
RF connector type	F, IEC
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Power consumption (max)	74 W
Power consumption (standby)	0.5 W
Power consumption (typical)	54 W

Weight and Dimensions

Depth (with stand)	225 mm
Height (with stand)	526 mm
Weight (with stand)	3600 g
Depth (without stand)	63.9 mm
Width (without stand)	901 mm
Height (without stand)	511.3 mm
Weight (without stand)	3500 g