EasyManuals Logo

Strong SRT 40FB4003 User Manual

Strong SRT 40FB4003
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1.0 INSTRUCTION
1.1 Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.
Only use attachments/accessories specified or provided by the manufacturer (such as the
exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety
information before installing or operating the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings with items, such
as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
The mark indicates a risk of electric shock. The external wires must be installed by an
instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one's hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily
operable. When not in use and during movement, please take care of the power cord set, e.g.
tie up the power cord set with cable tie or something like that. It shall be free from sharp edges
or similar which can cause abrasion of the power cord set. When put into use again, please
make sure the power cord is not damaged. In case of damages, please get the power cord
replaced by a similar one with the same specifications. The absence of a light indication on
the apparatus does not mean that it is fully disconnected from the mains. To disconnect the
apparatus completely, the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of fire, keep candles or other open flames away from this product
at all times.
A USB terminal can provide a maximum of 500 mA.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to electrical
earth.
Operating Environment
Do not install this equipment in a confined space such as a bookcase or similar unit.
Do not use the set near damp, and cold areas, protect the set from overheating.
Keep away from direct sunlight.
Do not use the set near dust place.
Do not attach candle to accessible opening area, to avoid flammable foreign material from
entering the TV.
3
English

Other manuals for Strong SRT 40FB4003

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Strong SRT 40FB4003 and is the answer not in the manual?

Strong SRT 40FB4003 Specifications

General IconGeneral
Screen shapeFlat
Response time8.5 ms
Display diagonal40 \
Display brightness250 cd/m²
Display technologyLED
Native refresh rate60 Hz
Contrast ratio (typical)5000:1
Display diagonal (metric)101 cm
Screen format adjustments16:9
Motion interpolation technologyIQR (Image Quality Ratio) 100 Hz
3DNo
Battery typeAAA
Stand weight100 g
Tuner typeDigital
Analog signal format systemNot supported
Digital signal format systemDVB-C, DVB-CI+, DVB-S2, DVB-T2
Operating system installed-
RMS rated power- W
Product colorBlack
Panel mounting interface200 x 200 mm
RF connector typeF, IEC
USB 2.0 ports quantity1
S-Video inputs quantity0
Power consumption (max)74 W
Power consumption (standby)0.5 W
Power consumption (typical)54 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)225 mm
Height (with stand)526 mm
Weight (with stand)3600 g
Depth (without stand)63.9 mm
Width (without stand)901 mm
Height (without stand)511.3 mm
Weight (without stand)3500 g

Related product manuals