Strong SRT 40FB4003 User Manual

Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and Encrypted channels
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only
or All for a complete search.
It is recommended to use the default settings.
3.2 DVB-T/T2 installation
Terrestrial Setting
First select the Tune Type by pressing t u to select DTV, ATV or DTV+ATV (DTV to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press t u to select All
Channels or FTA Channels. Press pq t u to highlight the country that you want to install, then press
OK to start searching.
3.3 DVB-C installation
Cable Setting
Press pq t u to highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search
advised)
NOTE: Full scan will have a duration of approximately 20 minutes, depending on
your cable network.
Frequency Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Network ID Please enter (with 0 ~ 9) the used Network ID from your provider.
Symbol Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
NOTE: Please check the settings for your cable system used by your provider!
Press OK to continue.
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels
Press pq t u to highlight the country that you want to install, then press OK to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE EPG
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing EPG on the
remote control. Press EPG to bring up the EPG interface. Use pq to select a programme. Press EXIT to
stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN Access extra info of programme
YELLOW Open the reminder setting over view
BLUE Set reminder of selected programme.
9
English

Strong SRT 40FB4003 Specifications

General

Screen shape	Flat
Response time	8.5 ms
Display diagonal	40 \
Display brightness	250 cd/m²
Display technology	LED
Native refresh rate	60 Hz
Contrast ratio (typical)	5000:1
Display diagonal (metric)	101 cm
Screen format adjustments	16:9
Motion interpolation technology	IQR (Image Quality Ratio) 100 Hz
3D	No
Battery type	AAA
Stand weight	100 g
Tuner type	Digital
Analog signal format system	Not supported
Digital signal format system	DVB-C, DVB-CI+, DVB-S2, DVB-T2
Operating system installed	-
RMS rated power	- W
Product color	Black
Panel mounting interface	200 x 200 mm
RF connector type	F, IEC
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Power consumption (max)	74 W
Power consumption (standby)	0.5 W
Power consumption (typical)	54 W

Weight and Dimensions

Depth (with stand)	225 mm
Height (with stand)	526 mm
Weight (with stand)	3600 g
Depth (without stand)	63.9 mm
Width (without stand)	901 mm
Height (without stand)	511.3 mm
Weight (without stand)	3500 g