5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use INPUT to select another source.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press t u to select an item. Press pq and OK to select the
submenus. Press MENU to exit the item.
5.2 Picture menu
Picture Mode Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and User.
Colour Temperature Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm and User.
Aspect Ratio Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2.
Note: Some options may not be available under some sources.
Noise Reduction Eliminates noise in the picture. Available choices are Off, Low, Middle and High.
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press pq to select an option, then press t u to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Brightness Adjust the optical fibre output of the entire picture, it will affect the dark
region of the picture.
Colour Adjust the saturation of the colour based on your own preference.
Tint No function
Sharpness Adjust the peaking in the detail of the picture.
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the
relevant picture effect (DEFAULT: Cold Normal Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press OK to enter a sub-menu.
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
10
To Next Page
