Strong SRT 40FB4003 User Manual

TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 4
1.3 Accessories 4
1.4 Equipment set-up 4
2.0 INSTALLATION 5
2.1 Default PIN code: 0000 5
2.2 Front panel/underside 5
2.3 Rear panel 5
2.4 Side panel 5
2.5 Remote control 6
2.6 Installing the batteries 7
2.7 Using the remote control 8
3.0 FIRST TIME INSTALLATION 8
3.1 DVB-S/S2 installation 8
3.2 DVB-T/T2 installation 9
3.3 DVB-C installation 9
4.0 ELECTRONIC PROGRAMME GUIDE EPG 9
5.0 MENU SETTINGS 10
5.1 Menu control (DTV mode) 10
5.2 Picture menu 10
5.3 Sound menu 11
5.4 Channel 11
5.5 Time menu 12
5.6 Lock 13
5.7 Setup Menu 13
6.0 USB 14
6.1 Reminder when using the USB player 14
6.2 USB menu 14
7.0 TROUBLESHOOTING 17
8.0 SPECIFICATIONS 18
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for
future reference.
2

Strong SRT 40FB4003 Specifications

General

Screen shape	Flat
Response time	8.5 ms
Display diagonal	40 \
Display brightness	250 cd/m²
Display technology	LED
Native refresh rate	60 Hz
Contrast ratio (typical)	5000:1
Display diagonal (metric)	101 cm
Screen format adjustments	16:9
Motion interpolation technology	IQR (Image Quality Ratio) 100 Hz
3D	No
Battery type	AAA
Stand weight	100 g
Tuner type	Digital
Analog signal format system	Not supported
Digital signal format system	DVB-C, DVB-CI+, DVB-S2, DVB-T2
Operating system installed	-
RMS rated power	- W
Product color	Black
Panel mounting interface	200 x 200 mm
RF connector type	F, IEC
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Power consumption (max)	74 W
Power consumption (standby)	0.5 W
Power consumption (typical)	54 W

Weight and Dimensions

Depth (with stand)	225 mm
Height (with stand)	526 mm
Weight (with stand)	3600 g
Depth (without stand)	63.9 mm
Width (without stand)	901 mm
Height (without stand)	511.3 mm
Weight (without stand)	3500 g