Strong SRT 5003 - Installation

7
PART 1 • English
English
Move
Press the [4] button to activate the Move function.
The selected channel will be marked in a symbol
q
p
, use the qp buttons to move the selected
channel to the desired position. Press OK, with tu select Yes in the confirmation window and press
[4] to save.
5.1.2 Radio Channel list
Basically, the operation of Radio Channel List is the same as in TV Channel List only difference is that
in Radio Channel List there is no video information, so it will always display the radio logo at the right
preview screen.
5.1.3 Delete all Favourites and Groups
Use this menu to delete all favourite channels. Select Delete All Favourites with the qp and press OK,
with tu select Yes in the confirmation window and press OK to delete or select No to cancel.
5.1.4 Delete all
Use this menu to delete all channels. Select Delete All with the qp and press OK, then enter the
Password (default:0000). In the confirmation window select Yes with tu and press OK to delete or
select No to cancel.
5.1.5 Group Rename
In this menu you can change favourite group name. Use the qp buttons to select Group Rename
and press OK to enter.
1. With the qp buttons select a group and press OK.
2. At the appearing Keyboard use the qptu buttons to highlight desired letters or
numbers and press OK to insert. After you entered desired group name, highlight OK
at the keyboard to confirm
3. Press EXIT button to cancel the group rename.
5.2 Installation
5.2.1 Auto Scan
1. Use the qp buttons to select Installation, press OK button to enter menu.
2. With the qp buttons select Auto Scan, press OK to enter the menu.
3. Press the tu buttons to change Scan mode, and use the qp to highlight Search,
press OK to start auto scan.
5.2.2 Channel Scan
1. Use the qp buttons to select Installation, press OK to enter the menu.
2. With the qp buttons to select Channel Scan and press OK to enter the menu.
3. Use the tu buttons to select one of two Scan Modes – By Channel and By Frequency.
4. When By Channel is selected use the cursor buttons to select Scan Band and Channel
No.. When By Frequency is selected use the cursor buttons to select Frequency and
Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to