10
PART 1 • English
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto Standby is ON.
The receiver will switch to standby automatically when it doesn’t receive commands from the remote
control for three hours. To avoid the automatic switch off, set Auto Standby to OFF.
5.4 Tools
Press MENU button to enter Main Menu. Select “Tools” with the pq buttons and press OK to enter.
1. Press pq buttons to highlight the desired menu and press OK to enter.
2. Press EXIT button to exit.
5.4.1 Receiver Information
This menu displays some Receiver information like Receiver Model, Software, Signature, and our
Website www.strong.tv.
1. In Tools menu, select "Receiver Information" and press OK to open
receiver information.
2. Press EXIT button to exit.
5.4.2 Game
This menu allows you to play games (Tetris, Snake and Othello) on this receiver.
1. Select "Game" in Tools menu and press OK button to enter game menu.
2. Press pq buttons to select a desired game, and press OK to enter the game.
Highlight "Start" and press OK to start the game. For changing levels highlight
“Setup” and use tu buttons.
3. Press EXIT button to quit the game
NOTE: You can also press OK button to pause playing
5.4.3 Load Factory Default
This menu allows you to reset the receiver back to factory settings, which clears all stored channels.
NOTE: This option will delete all your settings and channel lists and set your receiver
to factory default!
1. Enter "Tools" menu, select "Load Factory Default" and press OK button, you are asked
to input password.
2. Input a correct password using the numeric buttons (the default password is "0000"),
a confirmation window is displayed.
3. Select "Yes" to return back to factory settings and clear all channels. Select "No"
to cancel.
4. Press EXIT button to exit.
5.4.4 Software Upgrade
1. Enter "Tools" menu, select "Software Upgrade" and press OK button, Software Upgrade
menu is shown.
To Next Page
Loading...
