5
PART 1 • English
English
5. INFO Shows the actual channel information
6. VOL+/VOL- Volume up/down
7. MENU Opens the main menu/In menu you will get one step back
8. EXIT Exits from the menu or sub-menu
9. pq Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
10. tu Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
11. OK Menu On: Activates the highlighted menu item.
Menu Off: Displays the current channel list
12. RECORD No function
13. TIMESHIFT No function
14. 0~9 Channel selection or value input
15. EPG Shows the EPG (Electronic Program Guide) in TV mode
16. RECALL Back to previous shown channel
17. AUDIO Sets the current audio channel to left, right or stereo
18. TV/RADIO Toggles between TV or RADIO mode
19. FAV Favourite group selection
20. FILE no function
21. TTX Shows Teletext on OSD (On Screen Display)
22. SUBTITLE Shows list of subtitled languages
23. 5 6 Fast forward/rewind of video files
24. COLOURED BUTTONS for Teletext and other functions
3.4 Default PIN - code: 0000
4.0 FIRST TIME INSTALLATION
If you use the receiver for the first time, the "Easy Install" menu appears. Use qp to select Region,
OSD Language, Antenna Power and Scan Mode and tu to select options. Then use the qp buttons
to move focus to Search and press OK to proceed with the automatic channel scan.
5.0 MAIN MENU
In viewing mode always press MENU to enter the Main Menu. It consists of following submenus:
Channel, Installation, Setup, Tools and Media+
5.1 Channel
1. Use the qp buttons to select Channel and press OK to enter.
2. Use the qp buttons to highlight the desired item and press OK to select.
3. Press EXIT to exit.
NOTE: You can also press OK in TV mode to enter channel list.
To Next Page
Loading...
