9
English
buttons on the remote control or press OK in viewing mode to display the channel list. The volume can
be adjusted with VOL+/ or with t u.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7 to get familiar with the menu of your new HD+
receiver.
6.1 Selecting channels
There are different ways to change channels with your receiver.
Via direct access
Via the channel list
Via the CH+/ or p q buttons
Via the button
6.1.1 Direct access
To gain direct access to a certain channel simply enter its number with the 0~9 keys on the remote
control. Channel numbers can be up to 4 digits long. Entering numbers and values with less than 4 digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press OK or the LIST button in viewing mode to display the channel list.
Use p q to highlight your channel of choice and press OK to select the highlighted channel for
preview. Use the FAV button to get access to a group of favourite lists. Press OK to select only channels
from a particular list. Refer to chapter 7.1.1 TV Manager to organize channels into favourite lists.
Use the RED button to get access to group of satellites, which channels were stored to receiver during
installation procedure. Press OK to select only channels from particular satellite. Refer chapter 7.5.1 Dish
Setting to add more satellites for scanning.
The channel list is equipped with a Filter function to make it easier to find channels. Use GREEN button
to get access to TV Program List filter. There are 4 options to help to find channel. Use p q to select
option. Use t u to switch between Filter option, Group parameter and Channel list.
Use OK to confirm selection.
ALL for sequential search through complete list of all channels, which are stored in your
receiver from all satellites.
A-Z to search for the channel from the list in alphabetical order. In Group parameter define
first letter of channel name. At right side on screen you will see only channels, which
name starting from selected letter.
FAV to search for the channel within your favourite lists.
SAT to search for the channel by satellites, which channels were stored to receiver.
NOTE: The bottom row on the screen provides technical information of the selected
channel.
6.1.3 Using the CH+/ or pq buttons
CH+ or p will switch to a higher channel.
CH or q will switch a lower channel.
6.1.4 Using the button
Use the button to return to the last viewed channel.
To Next Page
Loading...
