Stryker LUCAS 3 Implementation Guide

Page 6
• Follow the instructions on the screen to connect LUCAS to a PC
using Bluetooth.
After a while you should see the serial number of your LUCAS 3, v3.1 device appearing
on your Wi-Fi Conguration Tool screen.
NOTE: This may take up to 2 minutes.
The Bluetooth LED
on the LUCAS user
interface should
start blinking (means
it is searching for
Bluetooth connection).
Back to contents

Stryker LUCAS 3 Specifications

General

Device Type	Chest Compression System
Power Source	Rechargeable Lithium-ion Battery
Compression Depth	5.3 ± 0.2 cm (2.1 ± 0.1 in)
Battery Life	45 minutes of operation
Battery Charge Time	Approximately 4 hours
Operating Modes	Pause
Patient Size	Fits most adult patients
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	–20 to +60 °C (–4 to 140 °F)
IP Rating	IP43
Compression Rate	100 compressions per minute