Stryker SERFAS - Disposable Probes; Footswitch; Handpiece Cable

DISPOSABLE PROBES DISPOSABLE PROBES
DISPOSABLE PROBES DISPOSABLE PROBES
DISPOSABLE PROBES (REF - 278-5xx-xxx)
::
::
:
1. Probe Tip – point of delivery of RF energy used to cut and coagulate.
2. Probe Shaft – Insulated.
3. Probe Handle – depending on probe used, handle may house two buttons. The yellow button is used to
activate the CUT function. The blue button is used to activate the COAG function.
4. Probe Connector – connects to Handpiece Cable.
FOOFOO
FOOFOO
FOO
TSWITTSWIT
TSWITTSWIT
TSWIT
CHCH
CHCH
CH (REF - 278-200-000)
::
::
:
NOTE: Use of the Footswitch is optional when a Hand-fire Probe is used.
1. Yellow CUT Pedal – used for activation of CUT function.
2. Blue COAG Pedal – used for activation of COAG function.
3. Yellow Minus (-) Pedal – used to adjust CUT level down.
4. Yellow Plus (+) Pedal – used to adjust CUT level up.
5. Footswitch Connector – Connects to front panel of RF Generator.
1. Handpiece Cable Connectors – used to connect to Probe and RF Generator. Either end of the Handpiece
Cable may be used to connect to the Probe or the Generator.
PRODUCT DESCRIPTION AND USE
HANDPIECE CABLEHANDPIECE CABLE
HANDPIECE CABLEHANDPIECE CABLE
HANDPIECE CABLE (REF - 278-300-000)
::
::
:
NOTE: Handpiece Cable is shipped non-sterile. Sterilize and clean Handpiece Cable prior to first use and before each
subsequent use (refer to Section VI, Cleaning and Sterilization).
1
2
5
43
4
1
2
7
NOTE: Probe appearance and functions will vary depending on the probe used. Refer to Probe User Insert for Probe
Type Definitions.
3
1
1