EEnngglliisshh
EENN
www.stryker.com KK-7100 REV 02 1-35
Accessories
Installing the lifting pole (Continued)
CAUTION
• Always make sure that accessories are locked into position.
• Always remove the lifting pole before transporting the product.
• Do not use the lifting pole as a push or pull device.
• Do not allow accessories to interfere with mechanical or electric mechanisms of the product.
You can install the lifting pole into either of the two accessory sleeves on the head end of the bed.
To install the lifting pole:
1. Insert the lifting pole into one of the two accessory sleeves (Figure 1-24 on page 1-35).
Figure 1-24: Installing the lifting pole
2. Rotate and lock the lifting pole into the accessory sleeve.