EEnngglliisshh
EENN
1-36 KK-7100 REV 02 www.stryker.com
Accessories
Installing the lifting pole handle
To install the lifting pole handle, place the black grip of the lifting pole between the two stoppers on the lifting pole
(Figure 1-25 on page 1-36).
Figure 1-25: Installing the lifting pole handle
Installing the oxygen bottle holder
WARNING
Do not use accessories to support patient limbs or other body parts.
CAUTION
• Always make sure that accessories are locked into position.
• Do not use the oxygen bottle holder as a push or pull device.
• Always turn the oxygen bottle holder in toward the bed before transporting a patient.
• Do not strike the oxygen bottle holder while transporting a patient.
• Do not allow accessories to interfere with mechanical or electric mechanisms of the product.
To Next Page
Loading...
Need help?
General
