Cruise control indicator light (type B)
The cruise control indicator light on the
combination meter will illuminate.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the “RES/SET” switch to the
“SET” side and release it. Then release
the accelerator pedal.
Cruise control set indicator light (type A)
1) U.S. spec. models
2) Except U.S. spec. models
Cruise control set indicator light (type B)
At this time, the cruise control set indicator
light is illuminated in the combination
meter. For models with a type A combina-
tion meter, the set speed will be shown on
the combination meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
Starting and operating 7-41
– CONTINUED –
To Next Page
Loading...
