1-6 Seat, seatbelt and SRS airbags
– Press button “1” or “2”
Some of your desired seat positions can
be registered. Register the seat position
with button “1” or “2” or each of the access
keys and retrieve the seat position.
The following seat positions can be
registered.
. Forward/backward position of the seat
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position with
button “1” or “2”
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “LOCK”/
“OFF” position.
. The select lever is in the “P” posi-
tion.
2. While pressing the “SET” button, press
and hold the desired button “1” or “2”.
3. The chirp sound sounds once, and the
seat position is registered.
! Registration of seat position with
each access key
1. Adjust the seat p osition under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “LOCK”/
“OFF” position.
. The select lever is in the “P” posi-
tion.
2. While holding the access key and
pressing the “SET” button, press the “
”
button of the access key.
3. The chirp sound sounds once, and the
seat position is registered.
! Retrieval of seat position registered
with button “1” or “2”
WARNING
Be sure to press the correct button
to retrie ve your registered seat
position. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the e ffectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
To Next Page
Loading...
