35
Vehicle Dynamics and Driver Assist Systems
May 2017
Service
The EBP features 6 service modes using the Subaru Select Monitor.
1. Parking Brake Removal Mode
When removing the rear drum-in-hat brake rotors
2. Force Sensor Calibration Mode
After removal, assembly, or adjustments have been performed
3. Brake-In Parking Brake Drive Mode
After replacing parking brake linings with new parts
4. Parameter Initialization Mode
When the EPB control unit has been replaced with a new part
5. Clutch Sensor Calibration Mode (MT Models Only)
After replacing the EPB control unit or clutch related components
6. Clutch Engagement Position Setting (MT Models Only)
After replacing or adjusting clutch related components
Caution: Always consult Subaru Service Manual for detailed procedures and
cautions before attempting.
Parking Brake Removal Mode
Before the parking brake shoes can be removed the EPB cables must be relaxed. Connect the
SSM to the vehicle and navigate to the EPB menu. Select Maintenance Operation Mode and
Parking Brake Removal Mode.
SSMIII Parking Brake Removal Mode
2-19
To Next Page
Loading...
