Sullair LS-12 - Page 57

Section 7
ILLUSTRATIONS AND PARTS LIST
52
7.9 COMPRESSOR COOLING AND LUBRICATION SYSTEM (AIR---COOLED, LS---12 SERIES 60HP, AND
LS---16 SERIES 60---75HP)
key part
number description number quantity
1 cooler, fluid and aftercooler assembly 250038---658 1
2 elbow, tube---m 1 1/2” x 1 1/2” 810524---150 3
3 tube, 1 1/2” 250018---259 1
4 connector, tube---m 1” x 1” 810216---100 3
5 tube, 1” 250039---987 1
6 elbow, tube---m 1” x 1” 810516---100 3
7 tube, 1” (12 Series 60HP) 250038---497 1
S
tube, 1” (16 Series (60 and 75HP) 250032---112 1
8valve,fluidstop
(I)
016741 1
9 elbow, tube---m 5/16” x 1/4” 810505---025 1
10 tubing, 1/4” 841015---004 10 ft.
11 nipple, pipe 1” x close 822216---000 3
12 tubing, 5/16” stainless steel 841215---005 2.7 ft.
13 connector, tube---m 1 1/4” x 1 1/4” 810220---125 2
14 bushing, reducing 1 1/4” x 1” 802105---040 1
15 connector, tube---m 1/4” 810204---025 2
16 filter, fluid
(II)
250025---522 1
17 tube, 1 1/4” (12 Series 60HP) 250018---246 1
S
tube, 1 1/4” (16 Series (60 and 75HP) 250018---255 1
18 washer, springlock 1/2” 837508---125 2
19 tee, reducing 1 1/2” x 1 1/4” x 1” 802206---054 1
20 nipple, pipe 1 1/2” x close 822224---000 2
21 valve, thermal
(III)
014512 1
22 bushing, hex 1 1/2” x 1” 802106---040 1
23 connector, tube---m 1 1/2” x 1 1/2” 810224---150 5
24 tube, 1 1/2” 250018---376 1
25 tee, reducing 1 1/2” x 1/2” x 1 1/2” 802206---026 1
26 nipple, pipe 1/2” x 4” 822108---040 1
27 valve, globe 1/2” 041007 1
28 capscrew, hex 1/2”---13 x 1 1/2” 828608---150 3
29 washer, pl---b regular unfinished 1/2” 837208---112 2
30 bracket, air connector and condenser drain 250017---233 1
(Continued on page 55)
(I)
For maintenance on fluid stop valve no. 016741, order repair kit no. 001684.
(II)
For maintenance on fluid filter no. 250025---522, order repair kit no. 250025---526.
(III)
For maintenance on thermal valve no. 014512, order repair kit no. 001168.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF COMPRESSOR.