Section 7
ILLUSTRATIONS AND PARTS LIST
58
7.10 COMPRESSOR COOLING AND LUBRICATION SYSTEM (AIR---COOLED, LS---16 SERIES 100HP)
key part
number description number quantity
31 capscrew, hex 1/2”---13 x 1 1/2” 828608---150 3
32 bracket, air connector & condenser drain 250017---233 1
33 tube, 1 1/2” 02250045---594 1
34 bushing, reducing 3/4” x 1/2” 802103---020 2
35 connector, tube elbow 1/2” mnpt x 3/8”t 813706---375 1
36 tubing, thermoplastic 3/8” 250024---746 1 ft.
37 conntector, tube straight 1/2” mnpt x 3/8”t 813606---375 1
38 coupling, pipe 3/4” 822112---025 1
39 nipple, pipe 3/4” x 2 1/2” 822112---025 1
40 separator, combination trap
(IV)
250018---041 1
41 u---bolt, 1/2” x 5” 829008---500 1
42 support, moisture separator and trap 250018---160 1
43 washer, springlock 1/2” 837508---125 2
44 tube, 1 1/2” 250018---375 1
45 nipple, pipe 1 1/2” 822124---085 1
(IV)
For maintenance on combination trap separator no. 250018---041, order repair kit no. 250033---038.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF COMPRESSOR.
To Next Page
Loading...
