Sullair LS-12 - Page 65

Section 7
ILLUSTRATIONS AND PARTS LIST
60
7.11 COMPRESSOR COOLING AND LUBRICATION SYSTEM (WATER---COOLED, LS---12 SERIES 60HP,
AND LS---16 SERIES 60---75HP)
key part
number description number quantity
1 elbow, tube---m 1” x 1” 810516---100 3
2 tube, 1” (12 Series 60HP) 250038---497 1
S
tube, 1” (16 Series 60 and 75HP) 250032---112 1
3valve,fluidstop
(I)
016741 1
4 elbow, tube---m 1/4” x 1/4” 810504---025 1
5 tube, 1/4” 841015---004 10 ft.
6 nipple, pipe 1” x close 822216---000 1
7 tube, 5/16” ss 841215---005 2.7ft.
8 connector, tube---m 1 1/4” x 1 1/4” 810220---125 2
9 bushing, reducing 1 1/4” x 1 802105---040 1
10 filter, fluid
(II)
250025---522 1
11 connector,tube---m 1/4” 810204---025 2
12 elbow, tube---m 1 1/2” x 1 1/2” 810524---150 2
13 tube, 1 1/2” 250018---400 1
14 plug, pipe 1/2” 807800---020 3
15 valve, globe 1/2” 041007 1
16 nipple, pipe 1/2” x 4” 822108---040 1
17 nipple, pipe 1 1/2” x close 822224---000 5
18 tee, reducing 1 1/2” x 1/2” x 1 1/2” 802206---026 2
19 connector, tube---m 1 1/2” x 1 1/2”
(12 Series (60HP) 810224---150 5
S
connector, tube---m 1 1/2” x 1 1/2”
(16 Series 60 and 75HP) 810224---150 6
20 tube, 1 1/2” 250018---376 1
21 tube, 1 1/4” (12 Series 60HP) 250018---246 1
S
tube, 1 1/4” (16 Series 60 and 75HP) 250018---255 1
22 elbow, pipe 1 1/2” (12 Series 60HP) 801515---060 3
S
elbow, pipe 1 1/2” (16 Series 60 and 75HP) 801515---060 5
23 tube, 1 1/2” 250018---375 1
24 u---bolt, 1/2” x 5”pipe 829008---500 1
25 separator, combination trap
(III)
250018---041 1
26 tube, 1 1/2” 250018---260 1
27 bracket, water connector 3/4” npt 250017---234 1
28 nipple, pipe 3/4” x 7” 822112---070 1
(Continued on page 63)
(I)
For maintenance on fluid stop valve no. 016741, order repair kit no. 001684.
(II)
For maintenance on fluid filter no. 250025---522, order repair kit no. 250025---526.
(III)
For maintenance on combination trap separator no. 250018---041, order repair kit no. 250033---038.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF COMPRESSOR.