Cyclo® BBB4
2 Operation & Maintenance Manual
Cyclo® BBB4
Important Notes
Safety Symbols
These safety symbols appear throughout this manual to indicate
important warnings:
DANGER: Incorrect handling of the unit and/or
failure to follow the instructions may cause physical
damage, serious personal injury, and/or death.
CAUTION: Incorrect handling of the unit and/or
failure to follow the instructions may cause physical
damage and/or personal injury.
Safety Precautions
Review and adhere to the instructions in this manual to ensure:
• trouble-freeCyclo®BBB4operation
• yourrightstomakeawarrantyclaim.
Read this manual and all accompanying documents thoroughly
before use. Understand the machine, information on safety, and
all precautions for correct operation. Sumitomo recommends
making this manual easily accessible for reference at the machine
location.
• Only properly trained personnel should
transport, install, align, wire, inspect, operate, and
maintain the unit.
• Whentheunitistobeusedinasystemfor
transport of human beings, a secondary safety
device should be installed to guard against
accidents that may result in injury, death, or
damage to the system.
• Whentheunitistobeusedforanelevator,installa
safety device on the elevator side to prevent it from
falling; otherwise, serious injury, death, or damage
to the elevator may result.
CAUTION:
• Operatetheunitonlywithinitsdesignand
performance specifications; otherwise, injury or
damage to the system may occur.
• Keephandsandallforeignobjectsfromthe
internal moving parts of the unit; otherwise, injury
or damage to the system may occur.
• Takedamagedunitso-lineimmediatelyanddo
not resume operation until properly repaired.
• Modicationsoralterationsofanykindtotheunit
will void the warranty and all subsequent claims.
• Donotremovetheratingplate.
Disposal
Please refer to local, state, and federal regulations governing
disposal of:
Steel Scrap:
• Housing(DuctileandGrayCastIron)
• Gears
• Shafts
• Bearings
Lubricants:
• GearOil
• Grease