Sumitomo Cyclo BBB4 - Grease Quantities

Cyclo® BBB4
34 Operation & Maintenance Manual
Cyclo® BBB4
Lubrication, continued
Grease Quantities
Unit Size
Unit Lubrication
Portion
Lube Quantity
oz. (gram)
only
4A100/105
Cyclo®
4.24 (120)
4A110/115 6.71 (190)
4A120/125 8.83 (250)
4A140/145
15.89 (450)
4B120/125 8.83 (250)
4B140/145 15.89 (450)
4B160/165 26.48 (750)
4C140/145 15.89 (450)
4C160/165 26.48 (750)
4C170/175 35.3 (1000)
4D160/165 26.48 (750)
4D170/175 35.3 (1000)
4E170/175
35.3 (1000)
4F180/185 38.8 (1100)
4F190/195 52.9 (1500)
Unit Size Cyclo® Stage
Lube Quantity
oz. (gram)
only
4A10DA
First (Input)
0.88 (25)
Second 4.24 (120)
4A12DA
First (Input) 0.88 (25)
Second 8.83 (250)
4A12DB
First (Input) 2.12 (60)
Second 8.83 (250)
4B12DA
First (Input) 0.88 (25)
Second 8.83 (250)
4B12DB
First (Input) 2.12 (60)
Second 8.83 (250)
4B14DA
First (Input) 0.88 (25)
Second 15.86 (450)
4B14DB
First (Input) 2.12 (60)
Second 15.86 (450)
4C14DA
First (Input) 0.88 (25)
Second 15.86 (450)
4C14DB
First (Input) 2.12 (60)
Second 15.86 (450)
4C14DC
First (Input) 4.24 (120)
Second 15.86 (450)
4C16DA
First (Input) 2.12 (60)
Second 26.48 (750)
4C16DB
First (Input) 4.24 (120)
Second 26.48 (750)
Grease Quantities
•GreasequantitieslistedinthissectionarefortheCyclo®portionofthereducer/gearmotor.
•TheBevelportionisalwaysoillubricatedunlessotherwisespeciedattimeoforderentry.
•RefertotheOilQuantitiessection,Tables25&26.forBevelportionoilquantities.
•InstallinggreaseintoBevelGearportionwillresultindamagetotheunit.
The Cyclo® (input) portion of only Y4 double reduction units is grease lubricated at the factory. Additional grease is not required before
initial start-up. All assemblies other than Y4 have oil lubricated Cyclo® portions. The following tables are provided for user rebuild or
refurbishment reference.
Table 28. Single Reduction Approximate Grease Quantity
Units: ounce (gram)
Table 29. Double Reduction Approximate Grease Quantity
Units: ounce (gram)