Sumitomo Cyclo BBB4 - Screw Conveyor Options; Components, Assembly Instructions; Screw Conveyor Assembly Instructions

Screw Conveyor Options
Components, Assembly Instructions
Figure 36. Cyclo® BBB4 Screw Conveyor Components
Screw Conveyor Assembly Instructions
Table 50. Typical Cyclo® BBB4 Screw
Conveyor Components
Item Number Description
1 Screw Conveyor Shaft for KHB
2 Screw Conveyor Shaft for TGB
3 Cast Screw Conveyor Adapter
4 Shaft Seal
5 Shaft Retaining Plate
6 Fabricated Screw Conveyor Adaptor
7 Optional Braided Cord Packing Seal
8 Optional Gland Cover Plate
1
Insert the screw conveyor shaft completely into the Cyclo® BBB4 output hub.
Tapered Grip Bushing Type – Screw the threaded end into the BBB unit.
Keyed Type – Apply anti-seize paste to the driven shaft, install key into shaft
keyway, align the key and hollow shaft keyway and carefully slide the shaft into
the BBB unit
Keyed Type
Screw Conveyor Components
Tapered Grip Bushing Type
-
54 Operation & Maintenance Manual
Cyclo® BBB4