Sumitomo Cyclo BBB4 - Page 57

Screw Conveyor Options, continued
Assembly Instructions
5
If supplied, carefully insert the application appropriate sealing material into the
bore of the screw conveyor adapter.
•Tosealtheoutputportionofthe screw conveyor adapter, Sumitomo provides
twodierentoptionsforeachscrewconveyorkit:
− High-Performance Braided Cord: recommended for use if the conveyed
material is abrasive.
− Double-Lip, Nitrile Oil Seal: recommended for use if conveyed material is a
nonabrasive liquid.
• Sumitomodoes not recommend the use of both sealing options at the same time.
6
If using the braided cord seal, carefully slide the cover plate over the screw
conveyor shaft and place it against the screw conveyor adapter. Secure the cover
plate using the supplied hardware.
7
If using the braided cord seal, tighten the gland cover bolts to achieve sufficient
sealing on the screw conveyor shaft.
Gland Cover Bolts
Hardware
Cover Plate
56 Operation & Maintenance Manual
Cyclo® BBB4